ATS Automatic Transfer Switch Panel 1Ph, 110A Generator Auto Start Output

Description

ATS Automatic Transfer Switch Panel 1Ph, 110A Generator Auto Start Output
This product data sheet is originally written in English.
ULTRA COMPACT AUTOMATIC TRANSFER SWITCH CONTROL PANEL (300x250x200mm)
AC3 current rating: 95 Amp.
AC1 current rating:110 amp.
It is a single phase 110A (non inductive load) / 95A ( inductive + non-inductive load) changeover switch (ATS) designed to sense when an electric utility outage occurs. If it happens, the ATS tells the backup generator to start. Once the ATS sees that the generator is ready to provide electric power, the ATS breaks the home's connection to the electric utility and connects the generator to the home's main electrical panel. The generator supplies power to the home's electric load, but is not connected to the electric utility.
When utility power returns for a set time, the transfer switch will transfer back to utility power and command the generator to turn off, after another specified amount of "cool-down" time with no load on the generator.
Wiri
ng Diagram
SPECIFICATION
Designed for single phase power supply: 220~240V 50/60Hz.
Requires
12V / 24V (8...40Vdc)
power supply (generator battery or separate DC power supply) to function.
It can permanently stay on mains if no DC supply.
The unit is IP60 rated (not suitable for external use, please fit inside the building).
Earth stud on base.
About enclosure: manufactured from mild steel then finished with a hardened epoxy polyester coated finish to RAL7035 (light grey).
This unit supplied with mains failure / genset available monitors and Auto start function.
Mains & Plant Available LED's
Mains & Plant On Load LED's
Excellent quality control gear used.
Very easy to use and install.
ATS105SP control module is used to operate the panel. To get a detailed description how this ATS system works please download the manual (copy and paste this link to your browser):
https://drive.google.com/file/d/1mlPHtnfmlKIwkNdbLelyTG8LXJA5VRrP/view?usp=sharing
IMPORTANT NOTES!
Your generator has to be "AUTO START" enabled to work with this (any) ATS panel (so called 2 wire start).
If your generator is a key start only (manual start) -we may help you to modify your set, please email us.
Please make sure your generator' battery is always charged. If you need a trickle charger please contact us first or order one from our Gencontrol eBay shop.
It is a single phase 110A (non inductive load) / 95A ( inductive + non-inductive load) changeover switch (ATS) designed to sense when an electric utility outage occurs. If it happens, the ATS tells the backup generator to start. Once the ATS sees that the generator is ready to provide electric power, the ATS breaks the home's connection to the electric utility and connects the generator to the home's main electrical panel. The generator supplies power to the home's electric load, but is not connected to the electric utility. When utility power returns for a set time, the transfer switch will transfer back to utility power and command the generator to turn off, after another specified amount of "cool-down" time with no load on the generator. ATS105SP control module is used to operate the pa
MPN
ATS105SP/100A/1PH
Model
ATS1001PH
Brand
GENCONTROL