CGG184E 21KW 1 Phase Brushless Gen/Alternator, PTO Gear Box, Coupler Combo !! +

Description

Description
New 1 Phase Brushless generator/alternator for diesel or gasoline engine or most any power source.
With industrial boost winding
to start heavy loads, will produce 150% of
rated power for 5 seconds
Shipped with AS440 AVR installed
30 HP Diesel engine required for full output, may use less hp engine but
will not get full output
42 HP Gasoline engine required for full output, may use less hp engine but will not
get full output
Set up instructions included.
These generators are of the synchronous drip proof salient, 4 pole rotating field self excitation
and constant voltage, with insulation of class H. These generators are very heavy and rugged
in construction, easy to maintain and are built to IEC34, Nema MG1-22, GB755, CSA
C22.2-100, VDE 0530 and ASB59 standards.These units have industrial boost windings to start
heavy loads and will produce 150% of rated power for 5 seconds. Units are shipped with
AS440 AVR installed. They can also be coupled directly to diesel or gasoline engine with SAE
bell housing to maintain generator at 1800 rpm.
Disclaimer:
These are parts to build your own PTO Generator system. You will need to build a frame to complete this project.
See example above of how you can use the Tractor Supply carry-all.
The frame is not included, this is just an example.
Stephen uses a Tractor Supply carry-all for base frame, mounted the generator and gearbox on wood for vibration damping.
You must build a structure to keep this completely stable! (Similar to the one pictured above or use your imagination)
Whats included:
CGG184E 21KW Single Phase, 2 Bearing Generator Head
PTO Gearbox
Coupler
FREE Volt/Frequency Meter
CGG184E 21KW
21KW
21,000 Watts
120/240 Volts, 1 phase
60 Hertz
4 Pole
1800 RPM
AVR Included
42MM Shaft
Requires 30 HP Diesel Engine for full output
Requires 42 HP Gasoline Engine for full output
PTO Gearbox:
1:3.55 Speed increase
540 RPM tractor to 1800 RPM out
1 3/8 Spline Input
42MM Smooth keyed shaft output
Can be used to increase PTO to 1800 RPM to drive a generator or other equipment
Shipped without oil (Must purchase 90-120 weight gear oil from local store, like John Deere) directions included
You must insert Corn Head grease in gearbox!
Coupler:
Used to connect PTO gearbox with drive shaft on generator
42MM x 42MM
48/60 4 jaw spider
42MM Shaft on PTO Gearbox
42MM Shaft on CGG184E 21KW Gen Head
Contact us for shipping rates. The cheapest option is shipping to a business address inside the city limits with no houses around with a loading dock or forklift.
To expedite the shipping process we will need:
1) YOUR NAME,
BUSINESS NAME AND ADDRESS
2) TO KNOW IF YOU HAVE A LOADING DOCK OR FORKLIFT
3) CONTACT PERSON AT BUSINESS ADDRESS OR INFORM US IF YOU WOULD LIKE TO PICK UP AT A FREIGHT TERMINAL
We no longer provide free shipping insurance.  If you desire shipping insurance you must contact us.  We have the ability to insure your shipment and will welcome any shipping insurance you may provide on your own.  We apologize for any inconvenience this may cause.
Terms of
Sale
All items must be paid for within seven (7) days.
About Us
Central Georgia Generator is a multi-faceted company based in Griffin, Georgia that has been in operation since 1999. We strive to provide you with the best customer service you can experience in the different fields that our company operates. We here at Central Georgia Generator understand the value of personal communication between customer and provider and aim to provide each customer with a great product and service. We have proudly established ourselves as a reputable company on eBay, earning 100% feedback rating. We strive to go above and beyond expectations. Above all else,
"We appreciate you considering us as your Supplier!"
We are available 9am-5pm Eastern Time, Monday-Friday.
Thanks,
CGG
Track Page Views With
Auctiva's FREE Counter